Choose Language
Fast speed, high efficiency, low noise, long life, economical molding industry, the most economical choice, multiple patent approvals, Phoenix series, 30-280 tons of various horizontal injection molding machines, used to remove finished products and nozzles. The model has 450/650/850 , the upper and lower arms are single-cut and double-cut; the upper and lower strokes are from 350-950mm, which are dedicated to two-plate molds; the single function is used for the water-clamping port, and the full function can be used to clamp the nozzle or simultaneously clamp the nozzle and suck. Finished product; claw-rotating mechanism, can rotate the finished product 90 degrees. The installation of this robotic arm can increase productivity, reduce product defect rate, ensure operator safety, reduce manual, precise control of production, and reduce waste.

P□□□□WV
Model: 450/650/850
W: double cut
V: Full-featured, including vacuum generator and standard suction cup fixture. The air consumption of this model already includes suction function.

General specifications
power supply
Power Source
Power supply capacity (KVA)
Power Capacity
working pressure
Working Pressure
Maximum allowable air pressure
Max.Allowed Pressure
Drive mode
Drive System
1ΦAC 220V±20V
50/60HZ
0.2 5kgf/cm2
0.49Mpa
8Kgf/cm2
0.8Mpa
Pneumatic Cylinder
power supply AC 220V±10V
50/60HZ
Power supply capacity (KVA) 0.2
working pressure 5kgf/cm2
0.49Mpa
Maximum allowable air pressure 8Kgf/cm2
0.8Mpa
Drive mode Pneumatic Cylinder
Main specifications
model
Applicable molding machine (ton)
Up and down stroke (mm)
Drawing stroke (mm)
Swing angle (degrees)
Take time (sec)
Maximum load (Kg)
Full cycle time (sec)
Air consumption (NI/cycle)
Net weight (Kg)
P450V
30-60
450
75
60-90
1.3
2
4.0
11
27
P650V/WV/IDV
50-160
650
120
60-90
1.7
2
4.5
14
30
P850WV
160-300
850
200
60-90
1.9
2
5.8
14
41
model P450V
Applicable molding machine (ton) 30-60
Up and down stroke (mm) 450
Drawing stroke (mm) 75
Swing angle (degrees) 60-90
Take time (sec) 1.3
Maximum load (Kg) 2
Full cycle time (sec) 4.0
Air consumption (NI/cycle) 11
Net weight (Kg) 27
model P650V/WV/IDV
Applicable molding machine (ton) 50-160
Up and down stroke (mm) 650
Drawing stroke (mm) 120
Swing angle (degrees) 60-90
Take time (sec) 1.7
Maximum load (Kg) 2
Full cycle time (sec) 4.5
Air consumption (NI/cycle) 14
Net weight (Kg) 30
model P850WV
Applicable molding machine (ton) 160-300
Up and down stroke (mm) 850
Drawing stroke (mm) 200
Swing angle (degrees) 60-90
Take time (sec) 1.9
Maximum load (Kg) 2
Full cycle time (sec) 5.8
Air consumption (NI/cycle) 14
Net weight (Kg) 41
* Due to continuous improvement of the model, the appearance and specifications are subject to change without notice.
TRC800

Control system TRC800

  • Program settings: 8 sets of built-in fixed mode, 4 kinds of teaching modes, to meet various production needs. For the statistics and management of production information, use charts to show convenient observations.
  • Alternate output: can be connected to automation equipment such as conveyor belts, spray-off agents or air pressure shears.
  • Storage capacity: 24 sets of mold data can be saved, including loading, editing, saving and other functions.
  • System record: operation history, alarm history, easy to repair and find problems.
  • IO display function: IO status can be viewed in any state, which is convenient for maintenance judgment. The status of the key IO is always displayed at the top of the screen, such as the safety door, the mold opening, the permission, the top, and the product inspection.
  • Man-machine: 3.5-inch color LCD, dedicated manual button. The color is pleasing to the eye, the appearance is beautiful, the ergonomics is simple, the operation is simple and easy to learn, and the operation habits of different people are satisfied to the greatest extent.