LANGUAGE:
FALCON
FalconFalcon
Detail
  • High-speed take out
  • Dry take out time: 0.5sec/ Dry cycle time: 2.6sec.
  • Falcon series is applicable to IMM under 350ton for taking out quick-formed products. Take-out at super high-speed(0.5sec.) and dry cycle time within 2.6seconds. It is applicable for all thin-wall formed products and the dry cycle time within 6seconds. It has ranges of model F900S1/F900S2/F1500S1/F1500S2. Side-Entry stroke: 900~1500mm, you can choose AC servo motor driven on one axis or 2axes. To take-out at high-speed increases output greatly.
  • Structure Feature:
    • AC servo motor driven on both two axes can take-out variety depth products; Or AC servo motor driven on one axis is optional for take-out thin wall products, such as CD-case.
    • High rigidity 3D structure design, stable construction, low vibration, longwearing and long-life.
    • Using special high precision high speed linear slide rail, wearproof, heatproof, long-life and not deformed.
    • Arm with high rigidity aluminum beam, light mass, high rigidity, cooperated with double-speed belt construction ensured the take-out time.
    • AC servo motor driven on single axle, crosswise axis can choose mechanically to adjust operation with mold open position.
    • T type steel wire PU belt driven, good stability, precision position at ∮0.1mm.
  • Control System:
    • With AC servo motor and driver, ensure longwearing and high performance.
    • PLC control system, strong ability of anti-interference, stable production and fast counting.
    • Big touch type screen, it’s easy to set and use.
    • Automatically defecting, displaying and recording the failures. Convenient to maintain and problem solving.
    • CE models are available, conforming with EUROMAP 12 or EUROMAP 67 standard, enclosed standard connect interface for connecting with IMM.
    • Fifty groups of molding memorizing function, it can be set fast while exchanging the mold, convenient for production and increased efficiency.
Specification
General specification:
Power source Working pressure Max. allowed pressure Drive system Swivel Control system
3øAC220v±10v
50/60HZ
5kgf/cm2
0.49Mpa
8kgf/cm2
0.8Mpa
X/YAC SERVO MOTOR 90°Fixed
Pneumatic
Mitsubishi servo controller


Main specification:
Model FA900S1 FA900S2 FA1500S1 FA1500S2
Power capacity(KVA) 4 5 5 6
Recommended IMM (ton) 50-200 50-200 200-350 200-350
Side entry stroke (mm) 900 900 1500 1500
Crosswise stroke (mm) fixed
50-500
(adjustable)
150-500 fixed
200-700
(adjustable)
200-700
Max. loading(kg) 2 2 3 3
Dry take out time(sec) 0.35 0.35 0.5 0.5
Dry cycle time(sec) 2.2 2.2 2.6 2.6
Air consumption (NI/cycle) 4 4 5 5
Net weight(kg) 200 210 380 390

Maximum addition to side-entry stroke to command is as follows:1000mm for FA900,1650mm for FA1500 Measuring reference for picking time under idle cycle is :assuming that every delay set to be 0,a full side entry stroke ,non horizontal stroke of reach. However, actual picking time depends on practical conditions so the data mentioned above are not guaranteed.