NEW TITAN SERIES-CNC AC SERVO BEAM ROBOTS
Feature
Specification
General specification:
| Power source | Working pressure | Max. allowed pressure | Drive system | Swivel | Control system |
| 3øAC220v±10v 50/60HZ |
5kgf/cm² 0.49Mpa |
8kgf/cm² 0.8Mpa |
AC servo motor | 90°Fixed Pneumatic |
Micro computer |
Main specification:
| Model | TN1300 WS-S3 |
TN1500 WS-S3 |
TN1700 WS-S3 |
TN1900 WS-S3 |
TN2200 WS-S3 |
TN2500 WS-S3 |
TN3000 WS-S3 |
| Power capacity(KVA) | 4 | 4 | 5 | 6 | 10.5 | 11 | 11 |
| Recommended IMM(ton) | 400-600 | 650-1000 | 850-1300 | 1000-1600 | 1600-2500 | 2000-3000 | 2500-4000 |
| Traverse Stroke(mm) | 2000 | 2400 | 2400 | 2700 | 2700 | 3200 | 4000 |
| Driven | AC servo driven on 3 axis. | ||||||
| Crosswise Stroke(mm) | 300-1200 | 400-1500 | 400-1500 | 500-1800 | 500-1800 | 550-2050 | 550-2150 |
| Vertical Stroke(mm) | 1300 | 1500 | 1700 | 1900 | 2200 | 2500 | 3000 |
| Max. loading(kg) | 12 | 20 | 20 | 30 | 30(50) | 50(100) | 50(100) |
| Dry take out Time(sec) | 1.5 | 1.8 | 2.0 | 2.5 | 2.8 | 3.5 | 4.5 |
| Dry cycle Time(sec) | 12 | 14 | 15 | 18 | 19 | 23 | 25 |
| Air consumption(NI/cycle) | 80 | 85 | 90 | 95 | 110 | 124 | 130 |
| Net weight(kg) | 580 | 700 | 750 | 1500 | 1600 | 2500 | 2800 |
| Model | TN1300WS3 | TN1500WS3 | TN1700WS3 | TN1900WS3 | TN2200WS3 | TN2500WS3 | TN3000WS3 |
| A | 1850 | 2200 | 2320 | 2530 | 2650 | 3010 | 3250 |
| B | - | 1720 | 1840 | 2080 | 2230 | 2425 | 2675 |
| C | 760 | 810 | 980 | 1060 | |||
| D | 1200 | 1375 | 1575 | 1760 | 2060 | 2760 | |
| E | 560 | 600 | 820 | 840 | |||
| I(Min) | 300 | 400 | 500 | 550 | |||
| I(Max) | 1200 | 1500 | 1800 | 2050 | 2150 | ||
| J | 160 | 210 | 110 | 210 | |||
| K | 190 | 220 | 135 | 240 | |||
| L | 2800 | 3000 | 3700 | 4200 | 5000 | ||
| M | 275 | 300 | 500 | 500 | |||
| N | 2000 | 2400 | 2700 | 3200 | 4000 | ||
| O | 100 | 40 | 50 | 100 | |||
| P | 450 | 600 | 925 | 1200 | |||
| Q | 250 | 360 | 550 | 650 | |||
