LANGUAGE:
EXPLORER SERIES-PET PREFORM BEAM ROBOTS
Explorer series-PET Preform Beam RobotsExplorer series-PET Preform Beam Robots
Detail
  • PET perform beam robot are designed for take-out of 350cc-1500cc PET perform, applicable to all types of PET injection mold machine ranging from 200T to 600T with 8~48 cavities mold. Installed on fixed platen and place PET outside of rear safety door. Enclosed cooling system on EOAT to cool the taken-out product., greatly shorten cooling time in mold and increasing output. With AC servo motor driven, take out products at high speed.
  • Structure Feature:
    • Integral arm design, super strong structure and with high rigidity linear slide rail on traverse side-entry axis, ensured long use life. Operate with belt to make it clean and without oil sludge. With AC servo motor driven, take out products at high speed with accurate position.
  • Specification of taking-out action:
    • Waiting out of safety door.
    • Swivel-in, sucking and waiting
    • IMM ejctor
    • Swivel-out to place products.
    • Rotated by 90?and coercive cooling products.
    • Rotate back and standby.
  • Jig for special PET, compelling cooling ,shorten the cooling time in the mold
  • Detecting system:
    • Vacuum pressure detecting to ensure EOAT sucked products. It will give alarm and stopped if EOAT failed to suck products.
  • Controller:
    • User-friendly touch type LCD control screen.
    • Full numerical setting, display and record the failure automatically.
    • Special EOAT keeps the PET from damage, coercive cooling shortened the cooling time in mold.
    • Han-held touch panel controller.
    • Touch panel screen is easy to learn and operate.
    • Hand-panel controller makes it convenient to adjust robot.
Feature

BOMARC SERIES BOMARC SERIES BOMARC SERIES BOMARC SERIES

Specification
General specification
Power Electric consumption Power capacity Working pressure Control system
AC220v±10v
3phase,50/60HZ
5.3Kw/hr 6.6 5kgf/cm2 PLC+Touch LCD
 

Main specification: 

Model EA-200S1 EA-300S1 EA-500S1
Recommended IMM(ton) 160-200 250-350 400-600
Traverse Stroke(mm) 1200 1500 1800
AC servo motor
Max. loading (include fixture) 25kg 40kg 60kg
Vacuum (mmAq) 2000 2500 3500
Max. vacuum load(Kg) 2.5 4 6
Dry take out Time(sec) 1.1 1.5 2
Suitable PET cavity 8~16 16~32 16~48
Air consumption(NI/cycle) 9 10 11
Net weight(kg) 490 520 520
Dimension(L*W*H) 2700*1000*1400 2700*1000*1400 3300*1300*1700